Day: September 10, 2020

14871-92-2 A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Synthesis of [Pd{OC(O)CH2N(COPh)}(bipy)] 2 A mixture of [PdCl2(bipy)] (210 mg, 0.63 mmol) with hippuric acid (113 mg, 0.63 mmol) and silver(I) oxide (600 mg) in dichloromethane (30 mL) was refluxed for 3.5 h. Methanol (30 mL) was added, and the mixture filtered to give a clear yellow solution. The solid residue was extracted with an additional 40 mL of dichloromethane-methanol (1:1 v/v), and the filtrates combined. The solution was evaporated to dryness, redissolved in dichloromethane (40 mL) and the product precipitated by addition of petroleum spirits (40 mL). The solid was filtered, washed with petroleum spirits (10 mL) and dried under vacuum to give 2 as an orange solid (192 mg, 69%). Found: C 50.2; H 3.45; N 9.1. C18H15N3O3Pd requires C 50.5; H 3.5; N 9.8%. (0043) 1H NMR, delta 9.12-6.91 (m, bipy and Ph), 4.26 (s, CH2). ESI MS (added NaHCO2, capillary exit voltage 140 V): [M+Na]+ m/z 461.88 (100%), calculated for C19H15N3O3PdNa m/z 462.00.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Sim, Sophie A.; Saunders, Graham C.; Lane, Joseph R.; Henderson, William; Inorganica Chimica Acta; vol. 450; (2016); p. 285 – 292;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

52522-40-4, 0.1328 g (0.4057 mmol) of 8-diphenylphosphine-2-methylquinoline, 0.0674 g (0.4261 mmol) of naphthoquinone and 0.2003 g(0.1935 mmol) of [Pd2(DBA)3CHCl3] were dissolved under inert atmosphere (Ar) in 30 ml of anhydrous acetone in a 100 ml necked flask. The mixture was stirred for 60 min at RT, the resulting orange solution treated with activated charcoal, filtered on a celite filter and concentrated under vacuum. The title complexwas precipitated as a paleorange solid by slow addition of diethylether, filtered off on a gooch, and washed with diethylether and n-pentane. 0.2039g (yield 89percent) of complex 1’b was obtained. 1H-NMR (300 MHz, CDCl3, T = 298 K, ppm) delta: 3.12 (s, 3H, quinoline-CH3), 4.98-5.05 (m, 2H, CH=CH) 7.06e7.13 (m, 2H, aryl naphthoquinone), 7.29-7.71 (m, 13H, H3, PPh2, aryl naphthoquinone), 7.79 (ddd,1H, J = 8.1, 7.5,1.4 Hz, H6), 7.90 (d,1H, J = 8.1, H7), 8.05 (dd, 1H, J = 7.5, 1.6 Hz, H5), 8.19 (dd, 1H, J = 8.4, 1.4 Hz, H4). 13C{1H}-NMR (CDCl3, T = 298 K, ppm) delta: 30.3 (CH3, quinoline-CH3), 62.7 (CH, CH=CH trans-N), 66.3 (d, CH, JCP = 21 Hz, CH=CH transP), 123.9 (CH, C3), 125.1 (CH, C5), 131.1 (CH, C7), 137.8 (CH, C6), 138.4 (CH, C4), 165.7 (d, C, JCP = 22.1 Hz, C9),165.7 (C, C2),184.0 (d, C, JCP = 6.2 Hz, CO transP), 185.2 (C, CO transN). 31P{1H}-NMR (CD2Cl2, T = 298 K, ppm) delta: 23.4. IR (KBr, pellet, cm-1): 1641 (nCO). Anal. Calcd. for C32H24NO2PPd: C 64.93, H 4.09, N 2.37. Found: C 65.06, H 3.98, N 2.21.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,its application will become more common.

Reference£º
Article; Canovese, Luciano; Scattolin, Thomas; Visentin, Fabiano; Santo, Claudio; Journal of Organometallic Chemistry; vol. 834; (2017); p. 10 – 21;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 14221-01-3,Tetrakis(triphenylphosphine)palladium, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 14221-01-3

General procedure: Into a 20 mL brown Schlenk tube were placed Pd(PPh3)4(0.05 mmol, 0.0578 g), PdCl2(MeCN)2 (0.05 mmol, 0.0130 g), norbornene(2.1 mmol, 0.2 g), and K2CO3 (2.0 mmol, 0.277 g). Then, 4-iodotoluene (2.0 mmol, 0.26 mL) as well as 8 mL DMA (containing 0.5 M H2O) were transferred to the tube by syringe under N2. The mixturewas stirred at 70 C for 20 h. The solutionwas washed withH2O and ether. The organic layer was extracted twice with ether. It was then purified by Centrifugal Thin Layer Chromatography (CTLC)using CH2Cl2 as eluent. The solvent was removed under reduced pressure. The yield of 5a is 98% (0.0848 g, 0.0980 mmol). The residue was subjected to crystallization process by CH2Cl2 and hexanesand yellow crystals were resulted. Similar processes were taken forthe preparation of 5b except that dicyclopentadiene (2.0 mmol,0.264 g) was used. The yield of 5b is 98% (0.0922 g, 0.0980 mmol). Yellow crystals were resulted in crystallization process by CH2Cl2and heptane., 14221-01-3

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14221-01-3,Tetrakis(triphenylphosphine)palladium,its application will become more common.

Reference£º
Article; Chen, Ya-Qian; Hong, Fung-E.; Tetrahedron; vol. 71; 38; (2015); p. 7016 – 7025;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 14871-92-2

General procedure: Silver tetrafluoroborate (AgBF4) (0.6 mmol) was dissolvedin methanol (7 mL); (2,2?-bipyridine) dichloropalladium(II)(Pd(Bpy)Cl2) (0.3 mmol) was dissolved in DMSO (1 mL),and then, the solutions were stirred together at ambient temperature0.5 h. Following gravity filtration, solid 3-hydroxyflavonederivative (0.3 mmol) and triethylamine (0.7 mL)were added to the filtrate. The reaction mixture was stirredfor 0.5 h (2 h for the Fla-OMe). The corresponding bipyridinepalladium flavonolato salt was then recovered usingvacuum filtration and recrystallized in CH3OH/CH3CN solvent;remaining solvent was removed in a vacuum desiccator overnight., 14871-92-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Han, Xiaozhen; Whitfield, Sarah; Cotten, Jacob; Transition Metal Chemistry; (2019);,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4 A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

52522-40-4, tetrakis(triphenylphosphine)palladium(0) [generated in situ from tris(diphenylmethylideneacetone)dipalladium chloroform adduct (16 mg, 0.016 mmol) and triphenylphosphine 312 mg, 0.12 mmol)] ; tetrakis(triphenylphosphine)palladium (0) [generated in situ from tris(dibenzylideneacetone)dipalladium chloroform adduct (27 mg, 0.025 mmol) and triphenylphosphine (52 mg, 0.20 mmol)]

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,its application will become more common.

Reference£º
Patent; Universitetet i Olso; US2007/203159; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 14871-92-2

To a yellow suspension containing 0.30 g (0.90 mmol) of [Pd(bpy)Cl2] in water (20 mL) wereadded a solution containing 0.06 g (0.46 mmol) of HaptHCl in water (10 mL) and an aqueoussolution of NaOH (0.3 M, 10 mL). When the mixture was stirred at 50 C for 3 h, the suspensionturned to a yellow solution. After filtration, a saturated aqueous solution of NaNO3 (10 mL) wasadded to the yellow filtrate, followed by storing in a refrigerator for 1 week. The resulting yellowcrystals of [3](NO3)2 suitable for X-ray analysis were collected by filtration. Yield: 0.19 g (55%).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(2,2¡ä-Bipyridine)dichloropalladium(II),14871-92-2,its application will become more common.

Reference£º
Article; Kouno, Masahiro; Miyashita, Yoshitaro; Yoshinari, Nobuto; Konno, Takumi; Chemistry Letters; vol. 44; 11; (2015); p. 1512 – 1514;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 14871-92-2

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Tris(dibenzylideneacetone)dipalladium-chloroform,52522-40-4,its application will become more common.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 887919-35-9,Bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 887919-35-9

Step 3-4, Preparation of tert-butyl (3R)-4-[4-(2-ethoxypyridin-3-yl)-3-fluoro-2-(methoxycarbonyl)phenyl]-3-ethylpiperazine-1-carboxylate To a mixture of tert-butyl (3R)-4-[4-bromo-3-fluoro-2-(methoxycarbonyl)phenyl]-3-ethylpiperazine-1-carboxylate (267 mg, 0.600 mmol), (2-ethoxypyridin-3-yl)boronic acid (150 mg, 0.900 mmol), Pd[t-Bu2P(4-NMe2C6H4)]2Cl2) (42.5 mg, 0.0600 mmol), and K2CO3 (249 mg, 1.80 mmol) in a sealed tube was added dioxane (4 mL) and H2O (0.4 mL). The resulting solution was degassed with N2 (g) for 10 min, sealed, and stirred at 100 C. for 30 min. The reaction was treated with additional (2-ethoxypyridin-3-yl)boronic acid (37.8 mg, 0.226 mmol), Pd[t-Bu2P(4-NMe2C6H4)]2Cl2) (13.4 mg, 0.0189 mmol), and K2CO3 (78.3 mg, 0.567 mmol) and stirred at 100 C. for additional 30 min. The mixture was concentrated and purified by C18 reversed phase column chromatography to give the title compound (255 mg, 87% yield) as a brown gum. LCMS (M+H)+: 488.4.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,887919-35-9,Bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II),its application will become more common.

Reference£º
Patent; Crinetics Pharmaceuticals, Inc.; HAN, Sangdon; ZHU, Yunfei; KIM, Sun Hee; ZHAO, Jian; WANG, Shimiao; (146 pag.)US2019/367481; (2019); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,its application will become more common.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method