Month: October 2020

Adding a certain compound to certain chemical reactions, such as: 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14871-92-2,14871-92-2

Direct synthesis from 1a, CF3SO3Ag, and [Pd(bipy)Cl2]. A solution of Pd(bipy)Cl2 (0.10 g, 0.30 mmol) in 5 mL of CH3CN and a solution of CF3SO3Ag (0.15 g, 0.58 mmol) in 5 mL of CH3CN were mixed and heated under reflux for a day. Precipitates were filtered off and the solvent was evaporated. The resultant pale yellow powder was dissolved in a mixture of CH3CN and CHCl3, and then 1a (0.35 g, 0.58 mmol) was added. The mixture was heated under reflux for a day, and then, filtered and the solvents were removed under reduced pressure. Resultant material was recrystallized from CH3CN- CHCl3 mixture twice. White fibers (0.27 g, 46.0%) were obtained. Mp. 249-252 C (dec.). 1H NMR ( CDCl3/CD3CN = 4/1, v/v, 300 MHz): delta 10.41 (brs, 8H, OH), 9.35 (brs, 4H, Py-H), 8.33 (d, J = 7.5 Hz, 2H, bipy-H), 8.26 (t, J = 7.0 Hz, 2H, bipy-H), 7.92 (brs, 4H, Py-H), 7.51 (t, 2H, bipy-H), 7.26 (d, J = 4.4 Hz, 2H, bipy- H), 6.99 (s, 4H, ArH), 6.95 (s, 4H, ArH), 6.89 (s, 4H, ArH), 6.67 (s, 4H, ArH), 4.11 (d, J = 13.8 Hz, 2H. CH2), 4.02 (d, J = 13.6 Hz, 4H. CH2), 3.80 (brs, 4H, CH2), 3.66 (brd, J = 10.8 Hz, 4H, CH2), 3.47 (brd, J = 13.8 Hz, 4H. CH2), 3.43 (brd, J = 12.9 Hz, 2H. CH2), 3.32 (d, J = 12.9 Hz, 4H, CH2), 2.19, 2.17 (s, 24H, CH3). 13C NMR ( CDCl3/CD3CN = 4/1, v/v, 75.6 MHz): delta 157.0, 153.2, 151.7, 150.7, 149.7, 147.2, 142.3, 131.2, 131.1, 130.0, 129.6, 129.5, 128.2, 128.0, 127.8, 127.8, 127.7, 124.2, 123.0, 121.0, 118.8, 57.7, 56.7, 32.0, 31.5, 20.5, 20.3. FABMS: m/z: 1611.5 ( M+); HRMS (FAB): calcd for C89H88F3N6O11S106Pd ( M2+ + TflO-), 1611.5219. Found: 1611.5231.

According to the analysis of related databases, 14871-92-2, the application of this compound in the production field has become more and more popular.

Reference£º
Article; Takemura, Hiroyuki; Mogami, Yukako; Okayama, Kanae; Nagashima, Noriko; Orioka, Kana; Hayano, Yuri; Kobayashi, Asako; Iwanaga, Tetsuo; Sako, Katsuya; Journal of Inclusion Phenomena and Macrocyclic Chemistry; vol. 95; 3-4; (2019); p. 235 – 246;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.14221-01-3,A new synthetic method of this compound is introduced below.14221-01-3

Into a 20 mL brown Schlenk tube were placed Pd(PPh3)4(0.05 mmol, 0.0578 g), PdCl2(MeCN)2 (0.05 mmol, 0.0130 g), norbornene(2.1 mmol, 0.2 g), and K2CO3 (2.0 mmol, 0.277 g). Then, 4-iodotoluene (2.0 mmol, 0.26 mL) as well as 8 mL DMA (containing 0.5 M H2O) were transferred to the tube by syringe under N2. The mixturewas stirred at 70 C for 20 h. The solutionwas washed withH2O and ether. The organic layer was extracted twice with ether. It was then purified by Centrifugal Thin Layer Chromatography (CTLC)using CH2Cl2 as eluent. The solvent was removed under reduced pressure. The yield of 5a is 98% (0.0848 g, 0.0980 mmol). The residue was subjected to crystallization process by CH2Cl2 and hexanesand yellow crystals were resulted. Similar processes were taken forthe preparation of 5b except that dicyclopentadiene (2.0 mmol,0.264 g) was used. The yield of 5b is 98% (0.0922 g, 0.0980 mmol). Yellow crystals were resulted in crystallization process by CH2Cl2and heptane.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tetrakis(triphenylphosphine)palladium.

Reference£º
Article; Chen, Ya-Qian; Hong, Fung-E.; Tetrahedron; vol. 71; 38; (2015); p. 7016 – 7025;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 14871-92-2,14871-92-2

Solid [Pd(bpy)Cl2] (0.166 g, 0.5 mmol) was added to dl-H2pa (0.064 g, 0.5 mmol) in ethanol (8 mL) containing triethyl amine (0.05 g, 0.5 mmol). The mixture was stirred for 72 h. The yellow-beige precipitate was filtered off, washed with ethanol and air-dried. Yield: 45%. Anal. Calcd. for C16ClH22N3O4Pd: C, 41.6; H, 4.8; N, 9.1; Cl, 7.7; Pd, 23.0%, Found: C, 41.5; H, 4.4; N, 9.0; Cl, 7.6; Pd, 23.1%. Conductivity data (10-3 M in DMF):LambdaM = 97.0 ohm-1. IR (cm-1): nu(NH) 3106; nuas(COO-) 1659; nus(COO-) 1411; nu(Pd-O) 521; nu(Pd-N) 471 cm-1. Raman: nuas(COO-) 1598; nus(COO-) 1402; delta(NH) 1560; nu(Pd-O) 529; nu(Pd-N) 450 cm-1; 1H NMR (d6-DMSO/TMS, ppm), 3.73 (d, H, Halpha); 2.50 (m, 2H, Hbeta); 2.07 (m, 2H, Hgamma); 1.30 (m, 2H, Hdelta); 3.45, 3.10 (m, 2H, Hepsilon); 13.19 (s, H, NH), ESI-MS: m/z, 816.7 {Pd(Hpa)(bpy)]2Cl}+, 780.7 {[Pd(bpy)(Hpa)]2}+, 390.0 [Pd(bpy)(Hpa)]+, 263.0 [Pd(bpy)]+., 14871-92-2

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 14871-92-2.

Reference£º
Article; Alie El-Deen, Afaf A.; El-Askalany, Abd El-Monem E.; Halaoui, Ruba; Jean-Claude, Bertrand J.; Butler, Ian S.; Mostafa, Sahar I.; Journal of Molecular Structure; vol. 1036; (2013); p. 161 – 167;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 10025-98-6,Potassium chloropalladite, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.10025-98-6

General procedure: The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Potassium chloropalladite.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), as follows.14871-92-2

Mefenamic acid (0.40 mmol) was dissolved in methanol (15 mL) followed by the addition of KOH (0.40 mmol). After 60 min of stirring, the resulting solution was slowly added to an aqueous solution of [PdCl2(bipy)] (0.20 mmol). After 40 min of constant stirring, the yellow solid obtained was collected by filtration, washed with ethanol and dried in a desiccator with P4O10. The yield was 63%. Anal. Calc. for [Pd(C15H14NO2)2(bipy)] (%): C 64.6; H 4.88;N 7.54. Found: C 63.3; H 4.74; N 7.62. The complex is soluble inchloroform and insoluble in water and DMSO. As already observed for the Pd-tra complex, no single crystals were obtained to perform an X ray structural characterization. The [PdCl2(bipy)] complexused as a precursor in the synthesis of Pd-mef was synthesized as described in the literature [21].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 14871-92-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Carvalho, Marcos A.; Arruda, Eduardo G.R.; Profirio, Daniel M.; Gomes, Alexandre F.; Gozzo, Fabio C.; Formiga, Andre L.B.; Corbi, Pedro P.; Journal of Molecular Structure; vol. 1100; (2015); p. 6 – 13;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, as follows.52522-40-4

To 50.0 mg (0.0483 mmol, 1 equiv.) of Pd2dba3?CHCl3 in 1.5mL of anhydrous acetone was added 134.0 mg (1.449 mmol, 30 equiv.) of norbornadiene and 27.0 mg(0.242 mmol, 5 equiv.) of N-methylmaleimide under an atmosphere of argon. The reaction mixture wasstirred for 30 min at room temperature, upon which noticeable palladium black had accumulated in thereaction vessel. The reaction mixture was transferred via cannula and filtered under argon to provide atranslucent yellow-green solution. The solution was briefly concentrated in vacuo to provide a moreviscous, yellow-green oil, to which 5.0 mL of anhydrous Et2O was added. This provided an opaque,yellow-green suspension of Pd(NBD)(NMM) catalyst as a fine yellow powder, which was usedimmediately in the coupling reaction, to avoid degradation.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 52522-40-4, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Nytko, Frederick E.; Shukla, Krupa H.; DeShong, Philip; Heterocycles; vol. 8; 2; (2014); p. 1465 – 1476;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4,The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 52522-40-4

0.0813 g (0.4637mmol) of TMQ, 0.1671 g (1.159 mmol) of dmfu and 0.2000 g (0.1932 mmol) of [Pd2(DBA)3. CHCl3] were dissolved under inert atmosphere (Ar) in 30 ml of anhydrous acetone. The mixture was stirred for 60 m and eventually treated with active charcoal for 5/10 min and filtered on celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered, washed with diethyl ether in excess and dried under vacuum. 0.1104 g (yield 67percent) of the title compound was obtained as pale yellow microcrystals.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese; Visentin; Biz; Scattolin; Santo; Bertolasi; Journal of Organometallic Chemistry; vol. 786; (2015); p. 21 – 30;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Adding a certain compound to certain chemical reactions, such as: 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 52522-40-4,52522-40-4

To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent). 1H NMR (CDCl3, T 298 K, ppm) d: 1.37 (s, 9H, tBu), 2.99 (s, 3H,CH3 quinoline), 5.62 (broad AB system, 4H, CH]CH), 7.51 (d, 1H,J 8.4 Hz, H3), 7.58 (dd, 1H, J 8.1, 7.3 Hz, H6), 7.93 (dd, 1H, J 8.1,1.3 Hz, H5), 8.02 (dd, 1H, J 7.3, 1.3 Hz, H7), 8.22 (d, 1H, J 8.4 Hz,H4).13C{1H} NMR (CDCl3, T 298 K, ppm) d: 29.6 (CH3, CH3 quinoline),30.9 (CH3, CMe3), 54.6 (C, CMe3), 100.5 (bs, CH, CH]CH), 123.8 (CH, C3), 125.9 (CH, C6), 128.0 (C, C10), 130.3 (C, C8), 130.6 (CH, C5),138.3 (CH, C4), 138.8 (CH, C7), 149.4 (C, C9), 165.0 (C, C2), 186.9 (C,CO), 188.4 (C, CO).1H NMR (CD2Cl2, T 193 K, ppm) d: 1.26 (s, 9H, tBu), 2.87 (s, 3H,CH3 quinoline), 4.71 (d, 1H, J 5.8 Hz, CH]CH), 4.92 (d, 1H, J 5.8 Hz,CH]CH), 6.10 (d, 1H, J 9.8 Hz, CH]CH), 6.22 (d, 1H, J 9.8 Hz,CH]CH), 7.51 (d, 1H, J 8.4 Hz, H3), 7.58 (dd, 1H, J 8.1, 7.3 Hz, H6),7.96 (dd, 1H, J 8.1, 1.3 Hz, H5), 8.01 (dd, 1H, J 7.3, 1.3 Hz, H7), 8.26(d, 1H, J 8.4 Hz, H4).13C{1H} NMR (CD2Cl2, T 193 K, ppm) d: 29.0 (CH3, eCH3 quinoline),30.3 (CH3, CMe3), 54.9 (C, CMe3), 63.5 (s, CH, CH]CH), 67.6 (s,CH, CH]CH), 124.2 (CH, C3), 126.2 (CH, C6), 127.9 (C, C10), 128.9 (C,C8), 131.1 (CH, C5), 134.5 (s, CH, CH]CH), 135.3 (s, CH, CH]CH),138.8 (CH, C4), 139.2 (CH, C7), 149.2 (C, C9), 165.0 (C, C2), 186.6 (C,CO), 188.3 (C, CO). IR (KBr pellets): -CN 1575, nCO 1613; 1636 cm1. Anal calc. for C20H21NO2PdS: C, 53.88; H, 4.75; N, 3.14. Found C,53.71; H, 4.79; N, 3.01percent., 52522-40-4

According to the analysis of related databases, 52522-40-4, the application of this compound in the production field has become more and more popular.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2 A common heterocyclic compound, 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The new bimetallic dinuclear complex, [{PdCl(bipy)}{l-(NH2(CH2)6H2N)}{PtCl(bipy)}]Cl(ClO4), was synthesized by modificationof the procedure reported in the literature [25]. The complex[PtCl2(bipy)] (100.0 mg, 0.236 mmol) was dissolved in DMF(10 cm3) and a solution of AgClO4 (49.1 mg, 0.236 mmol) in DMF(5 cm3) was added. The mixture was stirred overnight in the dark,at room temperature. The precipitate AgCl was removed by filtrationand the resulting pale yellow solution of [PtCl(bipy)(DMF)]ClO4 was kept in a refrigerator to cool down. A suspension of[PdCl2(bipy)] complex (73.5 mg, 0.220 mmol) in 10 cm3 of DMFwas heated with stirring at 303-313 K for about 30 min. After that,the solution of 1,6-diaminohexane (25.5 mg, 0.220 mmol) in 5 cm3DMF was added dropwise. The mixture was stirred at room temperaturefor 5 h in the dark. The filtrate [PtCl(bipy)(DMF)]ClO4was added to the resulting mixture. The clear yellow solutionwas stirred for 3 h at 323 K and then for 24 h at room temperature.The solution was then evaporated and the residue washed withether. A light yellow powder was obtained and left to dry in theair. Yield (63.8 mg, 62%). Anal. Calc. for PtPdCl4O4N6C26H32(FW = 935.88): C, 33.37; H, 3.45; N, 8.98. Found: C, 33.07; H,3.80; N, 8.73%. 1H NMR characterization (D2O, 200 MHz). 1H NMR(d, ppm): 1.35-1.50 (m, CH2 C3, C4), 1.60-1.80 (m, CH2 C2, C5),2.95-3.06 (m, CH2 C1, C6), 7.30-7.42 (d, CH H5/H50(1)), 7.45-7.60 (d, CH H5/H50(2)), 7.65-7.84 (m, CH H4/H40(1)), 8.05-8.15(m CH H4/H40(2)), 8.17-8.28 m, CH H3/H30(1)), 8.32-8.40 (m, CHH3/H30(2)), 8.42-8.48 (d CH H6/H60(1)), 8.50-8.58 (d CH H6/H60(2)). IR (KBr, 4000-300 cm1): 3438 (N-H stretch); 2853, 2927(CH2 stretch); 1610 (CN stretch); 1089 (perchlorate counterion); 765, 812 (N-H wagging) (Fig. S1).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand (2,2¡ä-Bipyridine)dichloropalladium(II) reaction routes.

Reference£º
Article; Jovanovi?, Sne?ana; Petrovi?, Biljana; Petkovi?, Marijana; Bugar?i?, ?ivadin D.; Polyhedron; vol. 101; (2015); p. 206 – 214;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14221-01-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14221-01-3,Tetrakis(triphenylphosphine)palladium, it is a common compound, a new synthetic route is introduced below.

General procedure: Into a 20 mL brown Schlenk tube were placed Pd(PPh3)4(0.05 mmol, 0.0578 g), PdCl2(MeCN)2 (0.05 mmol, 0.0130 g), norbornene(2.1 mmol, 0.2 g), and K2CO3 (2.0 mmol, 0.277 g). Then, 4-iodotoluene (2.0 mmol, 0.26 mL) as well as 8 mL DMA (containing 0.5 M H2O) were transferred to the tube by syringe under N2. The mixturewas stirred at 70 C for 20 h. The solutionwas washed withH2O and ether. The organic layer was extracted twice with ether. It was then purified by Centrifugal Thin Layer Chromatography (CTLC)using CH2Cl2 as eluent. The solvent was removed under reduced pressure. The yield of 5a is 98% (0.0848 g, 0.0980 mmol). The residue was subjected to crystallization process by CH2Cl2 and hexanesand yellow crystals were resulted. Similar processes were taken forthe preparation of 5b except that dicyclopentadiene (2.0 mmol,0.264 g) was used. The yield of 5b is 98% (0.0922 g, 0.0980 mmol). Yellow crystals were resulted in crystallization process by CH2Cl2and heptane., 14221-01-3

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 14221-01-3, other downstream synthetic routes, hurry up and to see.

Reference£º
Article; Chen, Ya-Qian; Hong, Fung-E.; Tetrahedron; vol. 71; 38; (2015); p. 7016 – 7025;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method