Day: October 14, 2020

52522-40-4, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”52522-40-4

0.1127g (0.4871mmol) of Me-TtBQ, 0.1755g (1.218mmol) of dmfu and 0.2101g (0.2030mmol) of [Pd2(DBA)3¡¤CHCl3] were dissolved under inert atmosphere (Ar) in 30ml of anhydrous acetone. The mixture was stirred for 60min and eventually treated with active charcoal for 5/10min and filtered on Celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered off, washed with diethyl ether in excess and dried under vacuum. 0.1452g (yield 75percent) of the title compound was obtained as pale yellow microcrystals.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Tris(dibenzylideneacetone)dipalladium-chloroform reaction routes.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Biz, Chiara; Scattolin, Thomas; Santo, Claudio; Bertolasi, Valerio; Polyhedron; vol. 102; (2015); p. 94 – 102;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) it is a common compound, a new synthetic route is introduced below.14871-92-2

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),its application will become more common.

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

(2,2¡ä-Bipyridine)dichloropalladium(II), A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

[Pd(bpy)Cl2] (0.10 g, 0.30 mmol) was suspended in water (4 mL). Lactic acid (0.03 g, 0.28 mmol) and 1 M NaOH (0.60 mL) were dissolved in water (10 mL) and then added to the mixture, which was heated under reflux at 150 C with continuous stirring until a clear yellow solution was obtained. The solution was filtered and acetone (10 mL) was added to the solution. The reaction mixture was cooled to 4 C for a long time (2 months), resulting yellow crystals of complex 5. Yield: 33%. m.p.: 250 C. Elemental Anal. Calc. for C13H13ClN2OPd (355.10): C, 44.0; H, 3.7; N, 7.9. Found: C, 44.1; H, 3.6; N, 7.8%. IR (KBr, numax/cm-1): 1634 s, nu(CO); 1621 s, nu(CC); 1496 m, 1443 s, nu(CC,CN). Far-IR (Nujol, numax/cm-1): 333 m, nu(Pd-Cl); 285 m, nu(Pd-C); 243 m, nu(Pd-N). 1H NMR (CDCl3, delta/ppm): 2.40 (s, 3H, c), 3.01 (s, 2H, a), 7.61 (m, 2H, 5,5?), 8.02 (m, 4H, 3,3? and 4,4?), 9.31, 9.51 (2d, 2H, 6,6?).

The chemical industry reduces the impact on the environment during synthesis,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Balboa, Susana; Carballo, Rosa; Castineiras, Alfonso; Gonzalez-Perez, Josefa Maria; Niclos-Gutierrez, Juan; Polyhedron; vol. 50; 1; (2013); p. 512 – 523;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

[1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II), A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”72287-26-4

c) N1-[2-phenyl-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-phenyl]-1-benzenesulfonamide. A mixture of the N1-(4-bromo-2-phenylbenzene)-1-benzenesulfonamide (0.388 g, 1.00 mmol), bis(pinacolato)diboron (0.305 g, 1.20 mmol), potassium acetate (0.294 g, 3.00 mmol) and [1,1′-bis(diphenylphosphino) ferrocene]dichloropalladium(II) (25 mg, 0.030 mmol) in DMF (10 ml) was heated under an atmosphere of nitrogen at 100¡ã C. for 16.5 hours. The DMF was evaporated in vacuo and the residue purified by silica gel flash chromatography using methylene chloride/heptane 7:3 plus 2percent triethyl amine to provide N1-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2-phenylbenzene]-1-benzenesulfonamide (0.135 g) as an oil. tR=23.13 min (RP-HPLC, 25-100percent acetonitrile-0.1percent TFA, 25 min); low resolution MS m/e 434 (M-H+)

72287-26-4 is used more and more widely, we look forward to future research findings about [1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II)

Reference£º
Patent; CALDERWOOD, DAVID; ARNOLD, LEE; MAZDIYASNI, HORMOZ; HIRST, GAVIN C.; DENG, BOJUAN B.; JOHNSTON, DAVID N.; RAFFERTY, PAUL; TOMETZKI, GERALD B.; TWIGGER, HELEN L.; MUNSCHAUER, RAINER; US2003/187001; (2003); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

(2,2¡ä-Bipyridine)dichloropalladium(II), A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”14871-92-2

To a yellow suspension containing 0.10 g (0.31 mmol) of [Pd(bpy)Cl2] in water (10 mL) wereadded a solution containing 0.04 g (0.32 mmol) of HaptHCl in water (10 mL) and an aqueoussolution of NaOH (0.25 M, 2.5 mL). When the mixture was stirred at 50 C for 3 h, the suspensionturned to a yellow solution. After filtration, a saturated aqueous solution of NaNO3 (5 mL) wasadded to the yellow filtrate. The mixture was stood at room temperature for 2 d, and the resultingyellow crystals of [2](NO3)2 was collected by filtration. Yield: 0.03 g (36%).

The chemical industry reduces the impact on the environment during synthesis,14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Kouno, Masahiro; Miyashita, Yoshitaro; Yoshinari, Nobuto; Konno, Takumi; Chemistry Letters; vol. 44; 11; (2015); p. 1512 – 1514;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Adding a certain compound to certain chemical reactions, such as: 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 52522-40-4,52522-40-4

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

According to the analysis of related databases, 52522-40-4, the application of this compound in the production field has become more and more popular.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), as follows.14871-92-2

General procedure: Silver tetrafluoroborate (AgBF4) (0.6 mmol) was dissolvedin methanol (7 mL); (2,2?-bipyridine) dichloropalladium(II)(Pd(Bpy)Cl2) (0.3 mmol) was dissolved in DMSO (1 mL),and then, the solutions were stirred together at ambient temperature0.5 h. Following gravity filtration, solid 3-hydroxyflavonederivative (0.3 mmol) and triethylamine (0.7 mL)were added to the filtrate. The reaction mixture was stirredfor 0.5 h (2 h for the Fla-OMe). The corresponding bipyridinepalladium flavonolato salt was then recovered usingvacuum filtration and recrystallized in CH3OH/CH3CN solvent;remaining solvent was removed in a vacuum desiccator overnight.

According to the analysis of related databases, (2,2¡ä-Bipyridine)dichloropalladium(II), the application of this compound in the production field has become more and more popular.

Reference£º
Article; Han, Xiaozhen; Whitfield, Sarah; Cotten, Jacob; Transition Metal Chemistry; (2019);,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.52522-40-4,A new synthetic method of this compound is introduced below.

0.1127g (0.4871mmol) of Me-TtBQ, 0.1755g (1.218mmol) of dmfu and 0.2101g (0.2030mmol) of [Pd2(DBA)3¡¤CHCl3] were dissolved under inert atmosphere (Ar) in 30ml of anhydrous acetone. The mixture was stirred for 60min and eventually treated with active charcoal for 5/10min and filtered on Celite filter. The resulting yellow solution was dried under vacuum and the residual treated with diethyl ether, filtered off, washed with diethyl ether in excess and dried under vacuum. 0.1452g (yield 75percent) of the title compound was obtained as pale yellow microcrystals.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Biz, Chiara; Scattolin, Thomas; Santo, Claudio; Bertolasi, Valerio; Polyhedron; vol. 102; (2015); p. 94 – 102;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), as follows.14871-92-2

14871-92-2, General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material.

According to the analysis of related databases, 14871-92-2, the application of this compound in the production field has become more and more popular.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

0.1328 g (0.4057 mmol) of 8-diphenylphosphine-2-methylquinoline, 0.0674 g (0.4261 mmol) of naphthoquinone and 0.2003 g(0.1935 mmol) of [Pd2(DBA)3CHCl3] were dissolved under inert atmosphere (Ar) in 30 ml of anhydrous acetone in a 100 ml necked flask. The mixture was stirred for 60 min at RT, the resulting orange solution treated with activated charcoal, filtered on a celite filter and concentrated under vacuum. The title complexwas precipitated as a paleorange solid by slow addition of diethylether, filtered off on a gooch, and washed with diethylether and n-pentane. 0.2039g (yield 89percent) of complex 1’b was obtained. 1H-NMR (300 MHz, CDCl3, T = 298 K, ppm) delta: 3.12 (s, 3H, quinoline-CH3), 4.98-5.05 (m, 2H, CH=CH) 7.06e7.13 (m, 2H, aryl naphthoquinone), 7.29-7.71 (m, 13H, H3, PPh2, aryl naphthoquinone), 7.79 (ddd,1H, J = 8.1, 7.5,1.4 Hz, H6), 7.90 (d,1H, J = 8.1, H7), 8.05 (dd, 1H, J = 7.5, 1.6 Hz, H5), 8.19 (dd, 1H, J = 8.4, 1.4 Hz, H4). 13C{1H}-NMR (CDCl3, T = 298 K, ppm) delta: 30.3 (CH3, quinoline-CH3), 62.7 (CH, CH=CH trans-N), 66.3 (d, CH, JCP = 21 Hz, CH=CH transP), 123.9 (CH, C3), 125.1 (CH, C5), 131.1 (CH, C7), 137.8 (CH, C6), 138.4 (CH, C4), 165.7 (d, C, JCP = 22.1 Hz, C9),165.7 (C, C2),184.0 (d, C, JCP = 6.2 Hz, CO transP), 185.2 (C, CO transN). 31P{1H}-NMR (CD2Cl2, T = 298 K, ppm) delta: 23.4. IR (KBr, pellet, cm-1): 1641 (nCO). Anal. Calcd. for C32H24NO2PPd: C 64.93, H 4.09, N 2.37. Found: C 65.06, H 3.98, N 2.21.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Tris(dibenzylideneacetone)dipalladium-chloroform,52522-40-4,its application will become more common.

Reference£º
Article; Canovese, Luciano; Scattolin, Thomas; Visentin, Fabiano; Santo, Claudio; Journal of Organometallic Chemistry; vol. 834; (2017); p. 10 – 21;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method