Day: October 16, 2020

52522-40-4,A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

The chemical industry reduces the impact on the environment during synthesis, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.52522-40-4

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Tris(dibenzylideneacetone)dipalladium-chloroform.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 53199-31-8,53199-31-8

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid., 53199-31-8

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 53199-31-8.

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. (2,2¡ä-Bipyridine)dichloropalladium(II),14871-92-2, This compound has unique chemical properties. The synthetic route is as follows.,14871-92-2

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 14871-92-2.

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), as follows.14871-92-2

Mefenamic acid (0.40 mmol) was dissolved in methanol (15 mL) followed by the addition of KOH (0.40 mmol). After 60 min of stirring, the resulting solution was slowly added to an aqueous solution of [PdCl2(bipy)] (0.20 mmol). After 40 min of constant stirring, the yellow solid obtained was collected by filtration, washed with ethanol and dried in a desiccator with P4O10. The yield was 63%. Anal. Calc. for [Pd(C15H14NO2)2(bipy)] (%): C 64.6; H 4.88;N 7.54. Found: C 63.3; H 4.74; N 7.62. The complex is soluble inchloroform and insoluble in water and DMSO. As already observed for the Pd-tra complex, no single crystals were obtained to perform an X ray structural characterization. The [PdCl2(bipy)] complexused as a precursor in the synthesis of Pd-mef was synthesized as described in the literature [21].

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,2¡ä-Bipyridine)dichloropalladium(II), and friends who are interested can also refer to it.

Reference£º
Article; Carvalho, Marcos A.; Arruda, Eduardo G.R.; Profirio, Daniel M.; Gomes, Alexandre F.; Gozzo, Fabio C.; Formiga, Andre L.B.; Corbi, Pedro P.; Journal of Molecular Structure; vol. 1100; (2015); p. 6 – 13;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 887919-35-9,Bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II), as follows.887919-35-9

Step 14-6, Preparation of tert-butyl N-{3-[(4-{4-[2-cyano-4-(trifluoromethyl)phenyl]piperazin-1-yl}-2′-ethoxy-[1,1′-biphenyl]-3-yl)formamido]propyl}carbamate To a mixture of tert-butyl N-{3-[(5-bromo-2-{4-[2-cyano-4-(trifluoromethyl)phenyl]piperazin-1-yl}phenyl)formamido]propyl}carbamate (20.0 mg, 0.0328 mmol), 2-ethoxyphenylboronic acid (10.9 mg, 0.0657 mmol), Pd[t-Bu2P(4-NMe2C6H4)]2Cl2) (9.2 mg, 0.013 mmol), and K2CO3 (27.2 mg, 0.197 mmol) in a sealed tube was added dioxane (2 mL) and H2O (0.2 mL). The resulting mixture was degassed with N2 for 10 min and stirred at 100 C. for 30 min. The mixture was concentrated and purified by C18 reversed phase column chromatography to give the title compound (18.5 mg, 87% yield) as a white solid. LCMS (M+H)+=652.5.

According to the analysis of related databases, Bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II), the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Crinetics Pharmaceuticals, Inc.; HAN, Sangdon; ZHU, Yunfei; KIM, Sun Hee; ZHAO, Jian; WANG, Shimiao; (146 pag.)US2019/367481; (2019); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Adding a certain compound to certain chemical reactions, such as: 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14871-92-2,14871-92-2

To a yellow suspension containing 0.30 g (0.90 mmol) of [Pd(bpy)Cl2] in water (20 mL) wereadded a solution containing 0.06 g (0.46 mmol) of HaptHCl in water (10 mL) and an aqueoussolution of NaOH (0.3 M, 10 mL). When the mixture was stirred at 50 C for 3 h, the suspensionturned to a yellow solution. After filtration, a saturated aqueous solution of NaNO3 (10 mL) wasadded to the yellow filtrate, followed by storing in a refrigerator for 1 week. The resulting yellowcrystals of [3](NO3)2 suitable for X-ray analysis were collected by filtration. Yield: 0.19 g (55%)., 14871-92-2

According to the analysis of related databases, 14871-92-2, the application of this compound in the production field has become more and more popular.

Reference£º
Article; Kouno, Masahiro; Miyashita, Yoshitaro; Yoshinari, Nobuto; Konno, Takumi; Chemistry Letters; vol. 44; 11; (2015); p. 1512 – 1514;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.72287-26-4,[1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II), it is a common compound, a new synthetic route is introduced below.72287-26-4

c) N1-[2-phenyl-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-phenyl]-1-benzenesulfonamide. A mixture of the N1-(4-bromo-2-phenylbenzene)-1-benzenesulfonamide (0.388 g, 1.00 mmol), bis(pinacolato)diboron (0.305 g, 1.20 mmol), potassium acetate (0.294 g, 3.00 mmol) and [1,1′-bis(diphenylphosphino) ferrocene]dichloropalladium(II) (25 mg, 0.030 mmol) in DMF (10 ml) was heated under an atmosphere of nitrogen at 100¡ã C. for 16.5 hours. The DMF was evaporated in vacuo and the residue purified by silica gel flash chromatography using methylene chloride/heptane 7:3 plus 2percent triethyl amine to provide N1-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2-phenylbenzene]-1-benzenesulfonamide (0.135 g) as an oil. tR=23.13 min (RP-HPLC, 25-100percent acetonitrile-0.1percent TFA, 25 min); low resolution MS m/e 434 (M-H+)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 72287-26-4, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; CALDERWOOD, DAVID; ARNOLD, LEE; MAZDIYASNI, HORMOZ; HIRST, GAVIN C.; DENG, BOJUAN B.; JOHNSTON, DAVID N.; RAFFERTY, PAUL; TOMETZKI, GERALD B.; TWIGGER, HELEN L.; MUNSCHAUER, RAINER; US2003/187001; (2003); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. (2,2¡ä-Bipyridine)dichloropalladium(II),14871-92-2, This compound has unique chemical properties. The synthetic route is as follows.

First, 63.6 mg (0.2 mmol)Of compounds 111-5 and 32.2 mmol (0.6 mmol)Of methanol was added to a mixture of 30 ml of anhydrous methanol and tetrahydrofuran(Volume ratio of 1: 1)Argon protection,After stirring at room temperature for 1.5 h,Followed by the addition of 66.4 mg (0.2 mmol) of cis-dichloro-1,1′-bipyridyl palladium (II)Continue to argon protection,Stirring at 25 C for 14 h,After the reaction,The resulting solid was purified by column chromatography,Get the target product,Weight 93.8 mg, yield: 85%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 14871-92-2.

Reference£º
Patent; Changchun Institute of Applied Chemistry, Chinese Academy of Sciences; Wang, Zhiyuan; Liu, Bo; Qiao, Wenqiang; (34 pag.)CN103483391; (2016); B;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), as follows.14871-92-2

General procedure: [Pd(bpy)Cl2] (0.20 g, 0.60 mmol) was suspended in water (25 mL). Silver nitrate (0.20 g, 1.19 mmol) in water (5 mL) was added and the reaction mixture was stirred for 6 h at 60 C and then at room temperature, always in absence of light. The resulting solution was centrifuged and filtered to remove AgCl. A few drops of water, glycolic acid (0.05 g, 0.66 mmol) and 1 M NaOH (1.20 mL) were added to the filtrate. The resulting solution was stirred for 5 days and concentrated at 60 C to 5 mL on a rotary evaporator. The mixture was cooled to room temperature and the yellow powder was filtered off and dissolved from water and again concentrated to 5 mL. Yellow single crystals suitable for X-ray diffraction were obtained from the resulting solution by slow evaporation at room temperature.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 14871-92-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Balboa, Susana; Carballo, Rosa; Castineiras, Alfonso; Gonzalez-Perez, Josefa Maria; Niclos-Gutierrez, Juan; Polyhedron; vol. 50; 1; (2013); p. 512 – 523;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method