Month: November 2020

A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 52522-40-4

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,its application will become more common.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, as follows.52522-40-4

General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 52522-40-4, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.14871-92-2

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), it is a common compound, a new synthetic route is introduced below.

General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 14871-92-2, other downstream synthetic routes, hurry up and to see.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8,The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 53199-31-8

Example 29 Preparation of 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44) This example describes the synthesis of common ligand mimics of the invention containing a linker group following the reaction scheme shown in . Compound numbers correspond to the numbers in the figure. The compounds 4-allyl-5-(4-fluoro-phenyl)-2,4-dihydro-[1,2,4]triazol-3-one (compound 42, 500 mg, 2.28 mmol) and 5-(4-bromo-phenyl)-furfural were mixed in dioxane (10 ml), followed by the addition of diisopropylethylamine (0.795 ml, 4.56 mmol). Bis(tri-tert-butylphosphine) palladium (56 mg, 0.109 mmol) was added to the reaction mixture, which then was stirred at a temperature of 90 C. for a period of 1 hour. Volatiles were removed in vacuo, and the residue was diluted in 0.2 N HCl solution, followed by extraction with ethyl acetate. Combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The crude product was purified by flash chromatography (gradient 7:3 to 9:1 ethyl acetate/hexanes+0.5% MeOH) to give 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44, 375 mg, 42%). 1H NMR (300 MHz, CDCl3) delta 4.55 (d, J=4.7, 2H), 6.31 (td, J=3.2, 16.0, 1H), 6.44 (d, J=16.0, 1H), 6.84 (d, J=3.7, 1H), 7.18 (dd, J=8.5, JHF=8.5, 2H), 7.32 (d, J=3.7, 1H), 7.40 (d, J=8.3, 2H), 7.61 (dd, J=8.5, JHF=5.2, 2H), 7.76 (d, J=8.3, 2H), 9.64 (s, 1H), 10.56 (s, 1H); 13C NMR (300 MHz, CDCl3) delta 43.8, 107.9, 116.3 (d, JCF=22), 123.2, 124.4, 125.6, 127.1, 128.7, 130.3 (d, JCF=9), 132.3, 137.1, 147.0, 152.2, 155.7, 158.9, 164.1 (d, JCF=250), 206.6; MS m/s 389.96 (M+1).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 53199-31-8.

Reference£º
Patent; Yu, Lin; Dong, Qing; Pierre, Fabrice; Chang, Edcon; Lang, Hengyuan; Qin, Yong; Fang, Yunfeng; Hansen, Mark; Pellecchia, Maurizio; US2004/9526; (2004); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

52522-40-4,A common heterocyclic compound, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

52522-40-4, General procedure: To 64.3 mg (0.278 mmol) of TTbQ-Me dissolved in anhydrous acetone (20 ml) in a two necked flask, 30 mg (0.278 mmol) of p-benzoquinone and 120 mg (0.116 mmol) of Pd2DBA3CHCl3 were added in sequence under inert atmosphere (Ar). The resulting mixture was stirred in the dark for 30 min, filtered on a celite filter and evaporated under vacuum to a small volume. Addition of Et2O induces the precipitation of the complex which was filtered off and dried in a desiccator for 5 h. 82.2 mg of the title compound as a red solid were obtained (yield 80percent).

The chemical industry reduces the impact on the environment during synthesis, 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Canovese, Luciano; Visentin, Fabiano; Santo, Claudio; Bertolasi, Valerio; Journal of Organometallic Chemistry; vol. 749; (2014); p. 379 – 386;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.72287-26-4,A new synthetic method of this compound is introduced below.72287-26-4

To a solution of Example 246A (48 mg, 0.11 mmol) and Example 246B (25 mg, 0.11 mmol) in EtOH (1 mL) and toluene (1 mL) under an argon atmosphere were added 2M Na2CO3 (0.165 mL, 0.33 mmol) followed by Pd(PPh3)4 (13 mg, 0.011 mmol)). The resulting suspension was stirred under argon at 85¡ã C. for 2 hours. The reaction was cooled to ambient temperature, concentrated and purified by preparative HPLC to give the title compound (8.8 mg). HPLC Rt=2.203 min. m/z=446.08., 72287-26-4

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, [1,1′-Bis(diphenylphosphino)ferrocene]dichloropalladium(II).

Reference£º
Patent; Fink, Brian E.; Gavai, Ashvinikumar V.; Vite, Gregory D.; Han, Wen-Ching; Misra, Raj N.; Xiao, Hai-Yun; Norris, Derek J.; Tokarski, John S.; US2005/250753; (2005); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. Bis(tri-tert-butylphosphine)palladium,53199-31-8, This compound has unique chemical properties. The synthetic route is as follows.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 53199-31-8.

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 52522-40-4,Tris(dibenzylideneacetone)dipalladium-chloroform, as follows.52522-40-4

To 50.0 mg (0.0483 mmol, 1 equiv.) of Pd2dba3?CHCl3 in 1.5mL of anhydrous acetone was added 134.0 mg (1.449 mmol, 30 equiv.) of norbornadiene and 27.0 mg(0.242 mmol, 5 equiv.) of N-methylmaleimide under an atmosphere of argon. The reaction mixture wasstirred for 30 min at room temperature, upon which noticeable palladium black had accumulated in thereaction vessel. The reaction mixture was transferred via cannula and filtered under argon to provide atranslucent yellow-green solution. The solution was briefly concentrated in vacuo to provide a moreviscous, yellow-green oil, to which 5.0 mL of anhydrous Et2O was added. This provided an opaque,yellow-green suspension of Pd(NBD)(NMM) catalyst as a fine yellow powder, which was usedimmediately in the coupling reaction, to avoid degradation.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 52522-40-4, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Nytko, Frederick E.; Shukla, Krupa H.; DeShong, Philip; Heterocycles; vol. 8; 2; (2014); p. 1465 – 1476;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II), This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.14871-92-2

First, 63.6 mg (0.2 mmol)Of compounds 111-5 and 32.2 mmol (0.6 mmol)Of methanol was added to a mixture of 30 ml of anhydrous methanol and tetrahydrofuran(Volume ratio of 1: 1)Argon protection,After stirring at room temperature for 1.5 h,Followed by the addition of 66.4 mg (0.2 mmol) of cis-dichloro-1,1′-bipyridyl palladium (II)Continue to argon protection,Stirring at 25 C for 14 h,After the reaction,The resulting solid was purified by column chromatography,Get the target product,Weight 93.8 mg, yield: 85%., 14871-92-2

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, (2,2¡ä-Bipyridine)dichloropalladium(II).

Reference£º
Patent; Changchun Institute of Applied Chemistry, Chinese Academy of Sciences; Wang, Zhiyuan; Liu, Bo; Qiao, Wenqiang; (34 pag.)CN103483391; (2016); B;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method