Category: 14871-92-2

14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) is a catalyst-palladium compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a vigorously stirred solution of BzpheH2 (32.32 mg, 0.12 mmol) in 8 mL CH3OH/H2O (V:V 1:1), [Pd(bipy)Cl2] (20 mg, 0.06 mmol) was added. The mixture was heated to 50C and adjusted to pH 8-9 by NaOH solution, and then stirred for 2 h. The solution was concentrated to about 80% of the original volume. The complex I-a was separated from the solution after a few days.

As the paragraph descriping shows that 14871-92-2 is playing an increasingly important role.

Reference£º
Article; Wang, Li-Wei; Liu, Si-Yuan; Wang, Jin-Jie; Peng, Wen; Li, Sheng-Hui; Zhou, Guo-Qiang; Qin, Xin-Ying; Wang, Shu-Xiang; Zhang, Jin-Chao; Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry; vol. 45; 7; (2015); p. 1049 – 1056;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),as a common compound, the synthetic route is as follows.

Solid [Pd(bpy)Cl2] (0.085 g, 0.25 mmol) was added to Hdahmp(0.04 g, 0.25 mmol) in ethanol (10 mL). Et3N (0.02 cm3, 0.20 mmol)was then added and the reaction mixture was refluxed for 48 h. Abrown precipitate was obtained which was filtered off, washedwith methanol and air-dried. Yield: 81%. Anal. Calc. for C14H13ClN6-OPdS: C, 36.9; Cl, 7.8; H, 2.9; N, 18.5; S, 7.0; Pd, 23.4. Found: C,37.1; Cl, 7.8; H, 2.8; N, 18.6; S, 7.2; Pd, 23.3%. Conductivity data(103 M in DMF): KM = 88.0 ohm1 cm2 mol1.

14871-92-2 (2,2¡ä-Bipyridine)dichloropalladium(II) 6096670, acatalyst-palladium compound, is more and more widely used in various.

Reference£º
Article; El-Morsy, Fatema A.; Jean-Claude, Bertrand J.; Butler, Ian S.; El-Sayed, Shadia A.; Mostafa, Sahar I.; Inorganica Chimica Acta; vol. 423; PB; (2014); p. 144 – 155;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),as a common compound, the synthetic route is as follows.

General procedure: Silver tetrafluoroborate (AgBF4) (0.6 mmol) was dissolvedin methanol (7 mL); (2,2?-bipyridine) dichloropalladium(II)(Pd(Bpy)Cl2) (0.3 mmol) was dissolved in DMSO (1 mL),and then, the solutions were stirred together at ambient temperature0.5 h. Following gravity filtration, solid 3-hydroxyflavonederivative (0.3 mmol) and triethylamine (0.7 mL)were added to the filtrate. The reaction mixture was stirredfor 0.5 h (2 h for the Fla-OMe). The corresponding bipyridinepalladium flavonolato salt was then recovered usingvacuum filtration and recrystallized in CH3OH/CH3CN solvent;remaining solvent was removed in a vacuum desiccatorovernight.[(PdII(Bpy)(3-Hydroxy-4?-methoxyFla)][BF4] complex1 Yield: 129 mg, 70% (orange crystals) Found: C, 50.51;H, 3.01; N, 4.52; Calcd for C26H19BF4N2O4Pd:C, 50.64;H, 3.11; N, 4.54. UV-Vis lambdamax (CH3CN/nm)(epsilon/M-1 cm-1) (444 (25 200); 1H NMR (CD3CN, 400 MHz): delta 7.92 (d,J = 6.5 Hz, 2H), 7.85 (m, J = 21.9 Hz, 4H), 7.65 (t, J = 18.7,2H), 7.47 (d, J = 7.3 Hz, 2H), 7.28 (t, J = 11.4 Hz, 1 H),7.19 (d, J = 6.5 Hz, 2 H), 7.13 (t, J = 13.9 Hz, 1 H), 6.66 (d,J = 8.1 Hz, 2 H); 13C NMR (CD3CN, 400 MHz): delta = 181.44,161.13, 153.96, 153.65, 152.62, 151.82, 150.65, 148.54,148.20, 140.94, 140.67, 138.01, 133.05, 129.37, 129.14,127.34, 127.27, 125.04, 124.44, 124.03, 123.10, 123.01,121.96, 121.73, 117.45, 115.53, 54.91 ppm. ESI MS: m/z(pos.) 529.04.

The synthetic route of 14871-92-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Han, Xiaozhen; Whitfield, Sarah; Cotten, Jacob; Transition Metal Chemistry; (2019);,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),as a common compound, the synthetic route is as follows.

General procedure: Palladium(II) chloride (PdCl2), 2,2?-bipyridine (bipy), 1,10-phenanthroline (phen), thiourea (TU, 1), N-methylthiourea (meTU, 2), N-buthylthiourea (buTU, 3), N,N?-diethylthiourea (dietTU, 4) and N,N?-dibuthylthiourea (dibuTU, 5) were purchased as pure reagents at AG, from Sigma Aldrich. Potassium tetrachloropalladate(II) was prepared by the reaction of palladium chloride with a slight excess of potassium chloride. The complexes [Pd(bipy)Cl2] and [Pd(phen)Cl2], were obtained by adding 1 mmol of the respective ligand to 0.326 g (1 mmol) of K2[PdCl4] suspended/dissolved in 40 mL of wet methanol under reflux for about 1 h. The precipitated crystalline powders were recovered by filtration and dried under vacuum for 2 h. 0.25 mmol of these complexes (83 and 89 mg, respectively) were then suspended again in a water/methanol mixture, whereupon 0.5 mmol of the respective thiourea (1-5) was added under reflux. After 1 h, clear yellow to orange solutions were obtained. These solutions were filtrated and the filtrates were kept for 3-5 days at room temperature for crystallization. As a result yellow-red crystals were obtained. The experimental yield of the products, based on Pd, was more than 50%. All the solvents, of analytical grade, were dried and deoxygenated before being used. Elemental analyses were performed at the Microanalytical Laboratory of Redox snc (Milano). Characterization details are extensively quoted in the supplementary material.

As the paragraph descriping shows that 14871-92-2 is playing an increasingly important role.

Reference£º
Article; Rotondo, Archimede; Barresi, Salvatore; Cusumano, Matteo; Rotondo, Enrico; Polyhedron; vol. 45; 1; (2012); p. 23 – 29;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),as a common compound, the synthetic route is as follows.

General procedure: Silver tetrafluoroborate (AgBF4) (0.6 mmol) was dissolvedin methanol (7 mL); (2,2?-bipyridine) dichloropalladium(II)(Pd(Bpy)Cl2) (0.3 mmol) was dissolved in DMSO (1 mL),and then, the solutions were stirred together at ambient temperature0.5 h. Following gravity filtration, solid 3-hydroxyflavonederivative (0.3 mmol) and triethylamine (0.7 mL)were added to the filtrate. The reaction mixture was stirredfor 0.5 h (2 h for the Fla-OMe). The corresponding bipyridinepalladium flavonolato salt was then recovered usingvacuum filtration and recrystallized in CH3OH/CH3CN solvent;remaining solvent was removed in a vacuum desiccator overnight.

14871-92-2 (2,2¡ä-Bipyridine)dichloropalladium(II) 6096670, acatalyst-palladium compound, is more and more widely used in various.

Reference£º
Article; Han, Xiaozhen; Whitfield, Sarah; Cotten, Jacob; Transition Metal Chemistry; (2019);,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) is a catalyst-palladium compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

First, 63.6 mg (0.2 mmol)Of compounds 111-5 and 32.2 mmol (0.6 mmol)Of methanol was added to a mixture of 30 ml of anhydrous methanol and tetrahydrofuran(Volume ratio of 1: 1)Argon protection,After stirring at room temperature for 1.5 h,Followed by the addition of 66.4 mg (0.2 mmol) of cis-dichloro-1,1′-bipyridyl palladium (II)Continue to argon protection,Stirring at 25 C for 14 h,After the reaction,The resulting solid was purified by column chromatography,Get the target product,Weight 93.8 mg, yield: 85%.

As the paragraph descriping shows that 14871-92-2 is playing an increasingly important role.

Reference£º
Patent; Changchun Institute of Applied Chemistry, Chinese Academy of Sciences; Wang, Zhiyuan; Liu, Bo; Qiao, Wenqiang; (34 pag.)CN103483391; (2016); B;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) is a catalyst-palladium compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[Pd(bpy)Cl2] (0.20 g, 0.60 mmol) was suspended in water (25 mL). Silver nitrate (0.20 g, 1.19 mmol) in water (5 mL) was added and the reaction mixture was stirred for 6 h at 60 C and then at room temperature, always in absence of light. The resulting solution was centrifuged and filtered to remove AgCl. A few drops of water, glycolic acid (0.05 g, 0.66 mmol) and 1 M NaOH (1.20 mL) were added to the filtrate. The resulting solution was stirred for 5 days and concentrated at 60 C to 5 mL on a rotary evaporator. The mixture was cooled to room temperature and the yellow powder was filtered off and dissolved from water and again concentrated to 5 mL. Yellow single crystals suitable for X-ray diffraction were obtained from the resulting solution by slow evaporation at room temperature. Yield: 41%, m.p.: 212 C. Elemental Anal. Calc. for C12H16N2O6Pd (390.67): C, 36.9; H, 4.1; N, 7.2. Found: C, 36.7; H, 4.0; N, 7.1%. MS (FAB+): m/z [assignment(relative intensity)]: 337(35) [M+], 262(94), 157(100). IR (KBr, numax/cm-1): 3376 m,br, 3207 m,br, nu(OH); 1626 s, nu(CC), nuasym(CO2); 1497 w, 1451 m, nu(CC,CN); 1370 m, nusim(CO2); 415 m. Far-IR (Nujol, numax/cm-1): 385 s, nu(Pd-O); 252 m, nu(Pd-N). 1H NMR (CD3OD, delta/ppm): 4.35 (s, 2H, b), 7.71 (m, 2H, 5,5?), 8.28 (m, 2H, 4,4?), 8.39 (d, 2H, 3,3?), 8.49 (d, 2H, 6,6?). 13C NMR (CD3OD, delta/ppm): 72.71 (1C, b), 124.93 (2C, 3,3?), 128.64, 129.04 (2C, 5,5?), 142.44, 142.78 (2C, 4,4?), 150.10, 151.44 (2C, 6,6?). UV-Vis (numax/cm-1): 36101, 30120, 26525 (Reflectance).

14871-92-2 (2,2¡ä-Bipyridine)dichloropalladium(II) 6096670, acatalyst-palladium compound, is more and more widely used in various.

Reference£º
Article; Balboa, Susana; Carballo, Rosa; Castineiras, Alfonso; Gonzalez-Perez, Josefa Maria; Niclos-Gutierrez, Juan; Polyhedron; vol. 50; 1; (2013); p. 512 – 523;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14871-92-2,(2,2¡ä-Bipyridine)dichloropalladium(II),as a common compound, the synthetic route is as follows.

Solid [Pd(bpy)Cl2] (0.166 g, 0.5 mmol) was added to dl-H2pa (0.064 g, 0.5 mmol) in ethanol (8 mL) containing triethyl amine (0.05 g, 0.5 mmol). The mixture was stirred for 72 h. The yellow-beige precipitate was filtered off, washed with ethanol and air-dried. Yield: 45%. Anal. Calcd. for C16ClH22N3O4Pd: C, 41.6; H, 4.8; N, 9.1; Cl, 7.7; Pd, 23.0%, Found: C, 41.5; H, 4.4; N, 9.0; Cl, 7.6; Pd, 23.1%. Conductivity data (10-3 M in DMF):LambdaM = 97.0 ohm-1. IR (cm-1): nu(NH) 3106; nuas(COO-) 1659; nus(COO-) 1411; nu(Pd-O) 521; nu(Pd-N) 471 cm-1. Raman: nuas(COO-) 1598; nus(COO-) 1402; delta(NH) 1560; nu(Pd-O) 529; nu(Pd-N) 450 cm-1; 1H NMR (d6-DMSO/TMS, ppm), 3.73 (d, H, Halpha); 2.50 (m, 2H, Hbeta); 2.07 (m, 2H, Hgamma); 1.30 (m, 2H, Hdelta); 3.45, 3.10 (m, 2H, Hepsilon); 13.19 (s, H, NH), ESI-MS: m/z, 816.7 {Pd(Hpa)(bpy)]2Cl}+, 780.7 {[Pd(bpy)(Hpa)]2}+, 390.0 [Pd(bpy)(Hpa)]+, 263.0 [Pd(bpy)]+.

14871-92-2 (2,2¡ä-Bipyridine)dichloropalladium(II) 6096670, acatalyst-palladium compound, is more and more widely used in various.

Reference£º
Article; Alie El-Deen, Afaf A.; El-Askalany, Abd El-Monem E.; Halaoui, Ruba; Jean-Claude, Bertrand J.; Butler, Ian S.; Mostafa, Sahar I.; Journal of Molecular Structure; vol. 1036; (2013); p. 161 – 167;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

14871-92-2, (2,2¡ä-Bipyridine)dichloropalladium(II) is a catalyst-palladium compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: [Pd(bpy)Cl2] (0.20 g, 0.60 mmol) was suspended in water (25 mL). Silver nitrate (0.20 g, 1.19 mmol) in water (5 mL) was added and the reaction mixture was stirred for 6 h at 60 C and then at room temperature, always in absence of light. The resulting solution was centrifuged and filtered to remove AgCl. A few drops of water, glycolic acid (0.05 g, 0.66 mmol) and 1 M NaOH (1.20 mL) were added to the filtrate. The resulting solution was stirred for 5 days and concentrated at 60 C to 5 mL on a rotary evaporator. The mixture was cooled to room temperature and the yellow powder was filtered off and dissolved from water and again concentrated to 5 mL. Yellow single crystals suitable for X-ray diffraction were obtained from the resulting solution by slow evaporation at room temperature.

As the paragraph descriping shows that 14871-92-2 is playing an increasingly important role.

Reference£º
Article; Balboa, Susana; Carballo, Rosa; Castineiras, Alfonso; Gonzalez-Perez, Josefa Maria; Niclos-Gutierrez, Juan; Polyhedron; vol. 50; 1; (2013); p. 512 – 523;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method