Tag: M.W:500-600

53199-31-8,A common heterocyclic compound, 53199-31-8,Bis(tri-tert-butylphosphine)palladium, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Example 29 Preparation of 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44) This example describes the synthesis of common ligand mimics of the invention containing a linker group following the reaction scheme shown in . Compound numbers correspond to the numbers in the figure. The compounds 4-allyl-5-(4-fluoro-phenyl)-2,4-dihydro-[1,2,4]triazol-3-one (compound 42, 500 mg, 2.28 mmol) and 5-(4-bromo-phenyl)-furfural were mixed in dioxane (10 ml), followed by the addition of diisopropylethylamine (0.795 ml, 4.56 mmol). Bis(tri-tert-butylphosphine) palladium (56 mg, 0.109 mmol) was added to the reaction mixture, which then was stirred at a temperature of 90 C. for a period of 1 hour. Volatiles were removed in vacuo, and the residue was diluted in 0.2 N HCl solution, followed by extraction with ethyl acetate. Combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The crude product was purified by flash chromatography (gradient 7:3 to 9:1 ethyl acetate/hexanes+0.5% MeOH) to give 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44, 375 mg, 42%). 1H NMR (300 MHz, CDCl3) delta 4.55 (d, J=4.7, 2H), 6.31 (td, J=3.2, 16.0, 1H), 6.44 (d, J=16.0, 1H), 6.84 (d, J=3.7, 1H), 7.18 (dd, J=8.5, JHF=8.5, 2H), 7.32 (d, J=3.7, 1H), 7.40 (d, J=8.3, 2H), 7.61 (dd, J=8.5, JHF=5.2, 2H), 7.76 (d, J=8.3, 2H), 9.64 (s, 1H), 10.56 (s, 1H); 13C NMR (300 MHz, CDCl3) delta 43.8, 107.9, 116.3 (d, JCF=22), 123.2, 124.4, 125.6, 127.1, 128.7, 130.3 (d, JCF=9), 132.3, 137.1, 147.0, 152.2, 155.7, 158.9, 164.1 (d, JCF=250), 206.6; MS m/s 389.96 (M+1)., 53199-31-8

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 53199-31-8 reaction routes.

Reference£º
Patent; Yu, Lin; Dong, Qing; Pierre, Fabrice; Chang, Edcon; Lang, Hengyuan; Qin, Yong; Fang, Yunfeng; Hansen, Mark; Pellecchia, Maurizio; US2004/9526; (2004); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. Bis(tri-tert-butylphosphine)palladium,53199-31-8, This compound has unique chemical properties. The synthetic route is as follows.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 53199-31-8.

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 53199-31-8,53199-31-8

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid., 53199-31-8

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 53199-31-8.

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8, Bis(tri-tert-butylphosphine)palladium, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid.

As the rapid development of chemical substances, we look forward to future research findings about 53199-31-8

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8, Bis(tri-tert-butylphosphine)palladium, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Example 29 Preparation of 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44) This example describes the synthesis of common ligand mimics of the invention containing a linker group following the reaction scheme shown in . Compound numbers correspond to the numbers in the figure. The compounds 4-allyl-5-(4-fluoro-phenyl)-2,4-dihydro-[1,2,4]triazol-3-one (compound 42, 500 mg, 2.28 mmol) and 5-(4-bromo-phenyl)-furfural were mixed in dioxane (10 ml), followed by the addition of diisopropylethylamine (0.795 ml, 4.56 mmol). Bis(tri-tert-butylphosphine) palladium (56 mg, 0.109 mmol) was added to the reaction mixture, which then was stirred at a temperature of 90 C. for a period of 1 hour. Volatiles were removed in vacuo, and the residue was diluted in 0.2 N HCl solution, followed by extraction with ethyl acetate. Combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The crude product was purified by flash chromatography (gradient 7:3 to 9:1 ethyl acetate/hexanes+0.5% MeOH) to give 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44, 375 mg, 42%). 1H NMR (300 MHz, CDCl3) delta 4.55 (d, J=4.7, 2H), 6.31 (td, J=3.2, 16.0, 1H), 6.44 (d, J=16.0, 1H), 6.84 (d, J=3.7, 1H), 7.18 (dd, J=8.5, JHF=8.5, 2H), 7.32 (d, J=3.7, 1H), 7.40 (d, J=8.3, 2H), 7.61 (dd, J=8.5, JHF=5.2, 2H), 7.76 (d, J=8.3, 2H), 9.64 (s, 1H), 10.56 (s, 1H); 13C NMR (300 MHz, CDCl3) delta 43.8, 107.9, 116.3 (d, JCF=22), 123.2, 124.4, 125.6, 127.1, 128.7, 130.3 (d, JCF=9), 132.3, 137.1, 147.0, 152.2, 155.7, 158.9, 164.1 (d, JCF=250), 206.6; MS m/s 389.96 (M+1).

With the complex challenges of chemical substances, we look forward to future research findings about Bis(tri-tert-butylphosphine)palladium,belong catalyst-palladium compound

Reference£º
Patent; Yu, Lin; Dong, Qing; Pierre, Fabrice; Chang, Edcon; Lang, Hengyuan; Qin, Yong; Fang, Yunfeng; Hansen, Mark; Pellecchia, Maurizio; US2004/9526; (2004); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As a common heterocyclic compound, it belongs to catalyst-palladium compound, name is Bis(tri-tert-butylphosphine)palladium, and cas is 53199-31-8, its synthesis route is as follows.

Example 29 Preparation of 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44) This example describes the synthesis of common ligand mimics of the invention containing a linker group following the reaction scheme shown in . Compound numbers correspond to the numbers in the figure. The compounds 4-allyl-5-(4-fluoro-phenyl)-2,4-dihydro-[1,2,4]triazol-3-one (compound 42, 500 mg, 2.28 mmol) and 5-(4-bromo-phenyl)-furfural were mixed in dioxane (10 ml), followed by the addition of diisopropylethylamine (0.795 ml, 4.56 mmol). Bis(tri-tert-butylphosphine) palladium (56 mg, 0.109 mmol) was added to the reaction mixture, which then was stirred at a temperature of 90 C. for a period of 1 hour. Volatiles were removed in vacuo, and the residue was diluted in 0.2 N HCl solution, followed by extraction with ethyl acetate. Combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The crude product was purified by flash chromatography (gradient 7:3 to 9:1 ethyl acetate/hexanes+0.5% MeOH) to give 5-(4-{3-[3-(4-fluoro-phenyl)-5-oxo-1,5-dihydro-[1,2,4]triazol-4-yl]-propenyl}-phenyl)-furan-2-carbaldehyde (compound 44, 375 mg, 42%). 1H NMR (300 MHz, CDCl3) delta 4.55 (d, J=4.7, 2H), 6.31 (td, J=3.2, 16.0, 1H), 6.44 (d, J=16.0, 1H), 6.84 (d, J=3.7, 1H), 7.18 (dd, J=8.5, JHF=8.5, 2H), 7.32 (d, J=3.7, 1H), 7.40 (d, J=8.3, 2H), 7.61 (dd, J=8.5, JHF=5.2, 2H), 7.76 (d, J=8.3, 2H), 9.64 (s, 1H), 10.56 (s, 1H); 13C NMR (300 MHz, CDCl3) delta 43.8, 107.9, 116.3 (d, JCF=22), 123.2, 124.4, 125.6, 127.1, 128.7, 130.3 (d, JCF=9), 132.3, 137.1, 147.0, 152.2, 155.7, 158.9, 164.1 (d, JCF=250), 206.6; MS m/s 389.96 (M+1).

53199-31-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,53199-31-8 ,Bis(tri-tert-butylphosphine)palladium, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Yu, Lin; Dong, Qing; Pierre, Fabrice; Chang, Edcon; Lang, Hengyuan; Qin, Yong; Fang, Yunfeng; Hansen, Mark; Pellecchia, Maurizio; US2004/9526; (2004); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

As a common heterocyclic compound, it belongs to catalyst-palladium compound, name is Bis(tri-tert-butylphosphine)palladium, and cas is 53199-31-8, its synthesis route is as follows.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid.

53199-31-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,53199-31-8 ,Bis(tri-tert-butylphosphine)palladium, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8 A common heterocyclic compound, 53199-31-8,Bis(tri-tert-butylphosphine)palladium, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid., 53199-31-8

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Bis(tri-tert-butylphosphine)palladium,53199-31-8,its application will become more common.

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method

53199-31-8 A common heterocyclic compound, 53199-31-8,Bis(tri-tert-butylphosphine)palladium, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

B. Synthesis of 3-(1-pyrrolidinyl)phenol 7g (30 mmol) of 1-Bromo-3-methoxymethoxy-benzene from step A and 2,5 g (35 mmol) of pyrrolidine were dissolved under argon in 60 mL of toluene. Then, 0.15 g (0.3 mmol) of bis(tri-t-butylphosphine)palladium(0), 2,5g KOH und 0,6g (0,15 mmol) cetyltrimethylammoniumbromid were added, and the reaction mixture was heated at 80 C. At the end of the reaction, the reaction mixture was poured into 200 mL of ethyl acetate, and the organic phase was extracted with 1 N sodium hydroxide solution and then dried with magnesium sulfate. The solvent was distilled off in a rotary evaporator, and the residue was purified on silica gel using heptane/ethyl acetate (8/0,8). The product thus obtained was dissolved in 15 mL of ethanol and mixed with 10 mL of a 2.9 molar solution of ethanolic hydrochloric acid.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Bis(tri-tert-butylphosphine)palladium,53199-31-8,its application will become more common.

Reference£º
Patent; Wella Aktiengesellschaft; EP1752192; (2007); A1;,
Chapter 1 An introduction to palladium catalysis
Palladium/carbon catalyst regeneration and mechanical application method